Tuesday, February 26, 2013

Caulking


Battening and striking waterline, using the paint-filled original as a guide.
   Trailered the inverted Jado up to Classic Boats in Kumeu first thing today, and she was unloaded and blocked up in Herbert's workshop by 9am.  A thankfully short but nerve-wracking drive, watching the 2x4 chocks on the mudguards in the wing mirrors.  First we reset the six engine bed bolts, as I had struggled with fitting those.  Improved the countersinks from both sides, added extra washers and caulked the heads.  Then we battened and struck the waterline using a pull saw.  Herbert begins repairs to the keel by replacing a broken forward piece and opening out some cracks with his Multimaster and a miniature router so that these can be glued.
Caulking going in around stem.
   Caulking begins with the garboard seams.  Any caulking wheeled in goes in quickly, but unfortunately the size and condition of the seams varies so we need several different irons plus the wheel to get it right, even over the length of one seam.  By the end of the afternoon I had done the garboards and three seams on the port topsides.  Such a luxury to both work in a workshop, and with an expert on hand - in fact, anyone on hand for some jobs.  Back tomorrow....


Sunday, February 24, 2013

All Aboard...

Mission: get Jado off her frame and onto her trailer.  First, jack the stern up  bit by bit.  Can I trust the sawhorses?

Then raise the bow.  
Remove the frame she's been sitting on and wheel the trailer underneath.

Then I had to be creative to support the bow whilst getting the trailer in position.  Now to lower the nose onto chocks...


...and tie everything down.  Basically the only parts of the boat making contact with the trailer are on  the mudguards and stem, there's a lot of boat aft waving in the breeze, and I made sure to hook the trailer up to the car beforehand.  I think if it was undone the stern would descend with some force!  All up, about 3hrs work, but went smoothly and nothing got damaged.  Now I'll be happy when we get to Herbert's, it's not an ideal way to transport a boat.

Thursday, February 21, 2013

Wet blankets covered by tarps to slow the drying out.
   An effort this summer to complete Jado's hull, most urgently the underside so that she can be placed right side up on her trailer for storage whilst we are in Japan.  Seams are all cleaned out and primed in red lead, and she is currently hibernating under some wet blankets to prepare her for caulking.  Monday 25th she will go up to Herbert's workshop (still inverted, but on the trailer) and we will spend a couple of days getting as much done as possible, before priming the hull and turning her with Herbert's gantry.  Then she will be ready for the next phase, which is installing mechanical components and fitout, once we return from Japan in a couple of years.
    Meanwhile I have found the perfect storage, in an open-ended shed on a property in Kumeu.  Far preferable to a commercial lockup where she would be outside in the sun.  Will post photo's hopefully, will need to borrow a camera to do this.


Sunday, January 8, 2012

   No pretty pictures this time, as Jado looks no different.  However, some good work has been done.  All paint is now stripped and am currently reefing out the old caulk, some of which is a breeze and some of which is very slow.  Generally the seams higher up - near the sheer - are still quite tight, the ones below the waterline you could push $2 coins through.  In quite a lot of places the cotton has been driven into the face of the planking rather than into the seam by someone who was a bit hasty with the caulking iron/wheel.  I can scoff now, but I'm sure to learn all about that shortly!
   Also bought a plunge router to deal with some of the cracks in the keel, Herbert's suggestion.  The method he described sounded so simple, which is always the case with Herbert's advice!   Next purchase will need to be a shop vacuum, my trusty Philips is no more, and need to get those seams hygienic....

Wednesday, October 12, 2011

Claim 77359628

Re: Claim # 77359628

To Whom It May Concern,
                                         regarding the claim above which is still in progress I have managed to recover a number of items that I found advertised on Trade Me.  Henderson Police returned them to me yesterday and so I now wish to withdraw this claim.
 
   This claim which was originally filed on August 6th.  I completed the forms online as I was told over the phone that this was the quickest way to proceed - so much faster than the old-fashioned paper forms -  and faxed the relevant receipts etc.  I was contacted very smartly by a caller who, having cast an eye over my submission, suggested that my tools with a total replacement value of over $3000 might not be worth claiming at all.  When asked if replacement value was not what my policy entitled me to, he waffled something about having not checked my policy yet, and would look into it once a privacy release document was signed.

   This was duly posted out to me along with a claim form to fill in, identical to the one I had completed online over two weeks prior, apparently in the interest of immediacy!  To these I attached copies of receipts for most of my items, photos of owners manuals and packaging left behind, plus written quotes for replacement items from two major hardware stores. This was bundled off to Tower in late August.  Following this up with a phone call I mentioned that my policy had "New for old option: Selected" on it.  This I took to mean that if someone stole, for example, my TV, then it could be replaced with a new model of equivalent size and brand. The helpful operator pointed out, however, that this "new for old option" only applied only to a specific list of items.  He read me the list of items covered, tools were not on it. Therefore I was only entitled to a present day value to be determined by Tower. I can find no wording on my policy detailing any inclusions or exclusions relating to the "new for old option" I had "selected".

Having not heard anything for some weeks I phoned on approximately September 17th and was told someone would call me within 24hrs to discuss the status of my claim.  This they did, and they acknowledged that my bundle had been received, and that what they were waiting for was a copy of the police report, which could take up to five weeks!  So I waited...

  When several items were recovered and finally returned to me on October 11th (nearly ten weeks after my online claim was submitted) I mentioned to the detective in charge of my case that Tower Insurance were waiting for the police report.  Imagine my disappointment when he told me one had not yet been requested.

Regards, Kerrin Worsfold

Sunday, September 4, 2011

The Naked Boat



Finished stripping the hull - port side only, but still a milestone.  JD painted her in 2-pack in the nineties, so it all had to come off.  Also happy to find the original waterline as scribed in the planking during the original build.  It had been painted nearly an inch lower at the stern, but was more or less right by the time it arrived at the stem.  Will probably batten this off and re-scribe it just to make sure it doesn't vanish again under coats of primer.

Tuesday, August 23, 2011

Back from the Dead.

Not dead, just a bit sore!  My ongoing episode of renal colic which began before Xmas has discouraged me from doing...anything, including working on Jado this year.  Towards the end of a four week spell of working 7 day weeks I found that thieves had broken into our basement and stolen all my tools, power and otherwise, that I've acquired over the last couple of years, which was devastating.  Devastating too was the insurance company pleb who recommended I not claim the loss - a work in progress as I write!

On a happier note, having earned two days off (in a row!) I re-clad the carport in fresh tarps to replace the ones shredded by the winter winds, repaired the basement door, and bought a few tools to begin again.  Have done some scraping of the port bilges this year but need to tackle this in earnest next.  Was also happy to find a nice vintage bilge pump of the type described to me by Jim Donald.  It mounts on the port stringer, just ahead of the for'ard thwart.  It is pictured as it arrived today, but will get stripped, dipped and renovated shortly.

Also bought another bronze bollard a few weeks ago, to replace the "original" one Bill Carter dug out for me.  I'm positive it wasn't from Jado, aside from the material evidence of marks left on the damaged deck king plank, it looks more rounded than earlier photos indicate.  The latest one is definitely not original either, but does look a better match for what was put there by P Vos Ltd in 1958.